Modeling a Superelevated Divided Highway with a Wall
Mar. 02, 2015 - 9:00 AM to 11:00 AM EST
Sean Conway
Model a divided highway with super elevation in a corridor and model a wall using linear templates. Integrate the wall model into the corridor model.
Creating and Annotating Cross Sections
Mar. 02, 2015 - 12:00 PM to 2:00 PM EST
Sean Conway
This class teaches how cross section sheets are created and annotated, earthwork volumes are computed, and mass haul diagrams are formulated.
QuickStart for Terrain & Geometry Using OpenRoads Technology
Virtual Classroom, United Kingdom
Mar. 03, 2015 - 9:00 AM to 12:00 PM UTC
Alan Mather
This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, MX, and Power InRoads software to use the OpenRoads Technology. You will learn to use the software to setup working files, attach existing ground terrain and aerial imagery, and define horizontal and vertical geometry. After completing this course we recommend you continue your learning with the QuickStart for Roadway Modeling Using OpenRoads course where you will learn how to model a roadway corridor and intersection.
QuickStart for Roadway Modeling Using OpenRoads Technology
Virtual Classroom, United Kingdom
Mar. 04, 2015 - 9:00 AM to 12:00 PM UTC
Alan Mather
This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, MX, and Power InRoads software to use the OpenRoads Technology. You will learn to model the roadway corridor using an existing 2 lane urban typical section with curb and cutter and sidewalk, control the pavement with geometry, and review the 3D corridor model. You will also model a T intersection complete with curb returns and side slopes using a civil cell. Finally, you will place pavement markings on the model. Before completing this course we recommend you complete the QuickStart for Terrain & Geometry Using OpenRoads course.
Templates - Using and Editing
Mar. 04, 2015 – 9:00 AM to 11:00 AM EST
Sean Conway
This course teaches how to efficiently modify and use existing templates, such as those delivered in the Bentley Civil Workspace, for your project situations. You will learn how to manage template libraries and edit templates to satisfy project specifications including minor edits such as pavement width, pavement slope, and end condition (cut/fill) treatments. You will also learn how to replace entire sections of templates with alternate components such as adding curb & gutter to a template.
QuickStart for Surveyors using OpenRoads Technology Full
Mar. 04, 2015 - 10:00 AM to 2:00 PM EST
Alvie Franklin Griffith
This course teaches all of the topics/courses in the QuickStart for Surveyors using OpenRoads learning path in a single session.
Defining Template Backbone
Mar. 05, 2015 - 9:00 AM to 11:00 AM EST
Sean Conway
This course teaches how to create templates and components for those complex project situations that require more than simply modifying existing templates. This training focuses on the hinge-to-hinge backbone portion of the template. You will learn how to create pavement slabs, pavement stripes, curbs, pavement widening matching existing pavement, and barriers.
Survey Fundamentals Full
Mar. 05, 2015 – 10:00 AM to 2:00 PM EST
Alvie Franklin Griffith
The course teaches how to expand on the skills learned in the QuickStart for Surveyors using OpenRoads Technology learning path. These courses teach how to process RAW survey data, edit survey data, and adjust survey data using Bentley civil software powered by the OpenRoads technology.
Defining End Conditions
Mar. 06, 2015 - 9:00 AM to 11:00 AM EST
Sean Conway
This hands-on training teaches how to create and make major modifications to template side slopes (end conditions). This training focuses on the side slopes connecting the template hinge to the tie down point. You will learn how to create end conditions with multiple cut and fill slope solutions, cut slopes with a ditch adjacent to the hinge, walls, and forced right-of-way solutions.